People all over the world love Canon when it comes to printers and other things that help them do their jobs better. They are appropriate for usage both at work and at home. Because Canon’s products are so common now, they have a bad reputation for having problems all the time, which hurts their business. A lot of people use Canon printers, so they might seem to have more problems. Because Canon’s error naming scheme is very easy to read and understand, the first thing you need to do to fix your problem is to figure out what caused it in the first place.

There are Canon printer problems with the code 5B00

The 5B00 error message means that either the wrong ink cartridge is being used or there is a problem with the waste ink counter. That’s only when you try to print. In this case, the printer will start up as if nothing had happened.

There are a few things you can do on your own to help solve the problem. If your Canon G2000 printer or any other model has an error code of 5B00, it’s not a big deal at all. It won’t cost you very much to fix. Do this before you do anything else. This is very easy to do. Power and data cables must be removed from the printer before you can start the printer again. Also, you need to open the cartridge cover and push the Power button to start the machine. Plug the power cord back in and wait for your printer to start a reset process while you hold down the power button. All of the signal lights will go on when this happens, so you will know when this happens. Then you will know. It might be possible to try another print job to see if this helps with the Canon error 5B00.

It’s possible that you can clean the waste ink pad. This can get dirty very fast. Waste ink pads need to be cleaned, so you need to open the cover of the ink cartridge and wait. Do this by pulling the power cord. The rollers and foam pads that are behind your ink cartridges are clear white and have foam on each end. They also have foam on both sides. This is the part that needs to be cleaned. The best thing to do is use paper towels when you do this. So put the pads back where they belong and turn the power back on so cartridges can work again.

Canon Printer Error Code 5B02

5B02 is a generic error code that can be triggered by one or more of the following:

  • Utilization of substandard third-party ink cartridges
  • The driver contains an internal software bug.
  • The waste ink bottle is completely absorbed.

To solve the problem, the first thing to do would be to make sure the printer was properly reset. Most Canon printers do this by taking the printer’s power and data lines out, as well as the ones for the printer itself. Then, as you connect the printer’s power cord to your device, hold down the power button on the printer to keep it running. When the printer is up and running, hit the Resume button twice while still holding down the power button to restart the printer. Repeat the process again for good measure, and then try to send another print job to the printer to see if the problem has been fixed.

After you try to solve the problem and it doesn’t work, the next thing you should do is to reinstall the driver. Make sure to use the service tool from Canon to get rid of the old driver and put in the new one. A drop-down menu can help if this doesn’t work for you. Then, pick Main Black and Set. Make sure you buy ink cartridges that are genuine, or at least one from a well-known brand from a third-party company.

Canon Printer Error Code 6A00

Because of a buildup of dust, ink, or paper on the guide that holds the cartridge, you get the 6A00 error message. This makes it hard for the cartridge carriage to return to its home place.

Take the printer’s power cord from the wall socket and shut it off. This will help you fix it. This will solve the problem. This will help. Cartridge carriage: Gently move it to its middle position to check the far right part of the guide rail Check to see if you have some microfiber cloths or paper towels with rubbing alcohol. This is all you’ll need to clean the railing. If you don’t do this, your railing won’t be clean around its entire circumference. Make sure to get everything out, even the hard-to-reach parts at the bottom of the railing. This should be your last action. You don’t need to put back the cartridge carriage. You don’t have to do anything when your printer is turned back on. It will figure out how to work again by itself.

Afterward, do not connect the power cord for at least half an hour. If the rail was cleaned the right way, everything should work as it should, too. In this way, you can make sure that all software problems have been fixed on the mainboard.

Canon Printer Error Code 6A80

Probably, the 6A80 error is caused by a driver software bug or a paper jam around one of the rollers or another moving part of the machine. This is what you should do.

If you want to solve the problem, you should try to reset the printer the way that the manufacturer tells you to do it. You should shut down your printer and remove all of the wires, even those that connect your printer to your computer. Before the reset can happen, the power must be turned off for at least 10 minutes so that it can happen. As soon as you plug the power back in, also plug in the data cable and try to print something to see if this helps. This is what you should do.

I think there’s a good chance that there’s paper stuck inside the printer. The original Canon Printer User Manual is the best place to start because there are a lot of different types. If you open up all the panels, you can figure out where paper jams might be, so you can get to them. Following these steps, you should be able to go back to work.

Canon Printer Error Code 6A81

It doesn’t work because of this: In front of the transport unit, there was a piece of paper that got stuck.

There are some panels that are blocking the feeder and transport unit, like a cassette, from being seen. You need to get rid of them to solve the problem, The cassette is very easy to take out of most Canon printers, and it doesn’t take long. The original Canon Printer User Manual is the best place to look if you are having trouble. This is where you will find a detailed description of how to do this. When you get the cassette out of its place, you might see a piece of paper. With two fingers, try to pull it a little bit at a time, being careful not to rip it.

So the paper might get stuck somewhere else, like on the right-hand side. In some Canon printers, this is where you can get help. This makes it easy to quickly look at any paper that might be stuck or other things that might be causing the 6A81 error code.